Dynex DX-ECFW Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Adattatore Dynex DX-ECFW. Dynex DX-ECFW 16. Expresscard firewire 800
Anche per Dynex DX-ECFW: Faq (3 pagine), Manuale di configurazione rapida (2 pagine), (inglese) Guida dell'utente (16 pagine), (Inglese) Guida alla configurazione rapida (2 pagine), (Francese) Manuale d'uso (16 pagine), (Francese) Guida all'installazione rapida (2 pagine)

Installing the adapter

not require the optional power adapter to be connected in

order to work. However non-powered FireWire devices require

an optional 12V/2A power adapter to work.

Installing the adapter

To install the FireWire ExpressCard adapter:

• Carefully insert the adapter into the ExpressCard slot of

your laptop until it's firmly seated in the ExpressCard slot.

(Refer to the ExpressCard slot instructions from your

laptop's user guide).

Windows installation:

Windows 2000, Windows XP, and Windows Vista automatically detect the

adapter after it is installed, then installs the correct driver. No separate

driver installation is needed.

To verify proper installation in Windows:

1 To verify if the device exists in your computer and is

enabled, right-click My Computer, then select

Properties.

2 Click Device Manager and open the entry IEEE 1394 Bus

host controllers.

If the device has been properly installed, its sub-entry

should be displayed as OHCI Compliant IEEE 1394 Host

Controller in Windows 2000 and Windows XP or AGERE

OHCI Compliant IEEE 1394 Host Controller in

Windows Vista.

Mac OS X (v10.4 or later) installation:

Computers with Mac OS X v10.4 or later include a FireWire driver provided

by the operating system. No additional driver software is necessary. After

the FireWire ExpressCard adapter is installed, start the computer.

: FireWire devices have their own power supply and do