Coraid EtherDrive SR1521T Manuale di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di installazione per Immagazzinamento Coraid EtherDrive SR1521T. Coraid EtherDrive SR1521T 5.

Stampa la pagina
b.
(Note: Disk trays are initially supplied with a plastic blank where the disk is installed. This plastic blank also
provides an air flow restriction to slots that are not yet inhabited by disks. Do not remove the plastic blank
until you are ready to install a disk in its place, to maintain proper air flow within the shelf.) Remove the
plastic blank attached to the disk drive tray and install a SATA disk drive in its place using six screws
provided.
c.
The disk and tray is now ready to be plugged into its slot in the shelf.
3. Shelf Address Configuration & Network Connection
a.
IMPORTANT NOTE: Each shelf sharing a common Ethernet network must have a unique address to
prevent an address conflicting which may disrupt operation of other storage devices on the network
b.
Connect a terminal to the serial com port (Com1 settings are 9600 N 1) or KVM ports on the back of the unit.
c.
Now refer to the software manual for configuration setup.
d.
CED4U15ST EtherDrive
shelf. Use CAT6 Ethernet cable only to connect to a GigE Ethernet switch or directly a Server. Cross over
cables are not required. The SR1521T will auto negotiate the connection speed and cable connection
polarity.
e.
If using an Ethernet switch please insure it can support 802.3x (flow control) and jumbo Ethernet frames.
Most modern Ethernet switches support these standards.
f.
Install the latest AoE software driver on each Server that will be accessing the EtherDrive Storage. This can
be downloaded from Coraid's web site at
g.
EtherDrive Storage is now ready and accessible by the network connected Servers, equipped with ATA-
over-Ethernet (AoE) drivers. Please consult the Coraid web site
"HOWTO" information.
Coraid Inc.
Disk Carrier Eject
®
Storage appliances have two Gigabit Ethernet connections on the rear of the
www.coraid.com/support
Page 4
www.coraid.com/support
for helpful