Dynex DX-CR112 Domande frequenti - Pagina 2

Sfoglia online o scarica il pdf Domande frequenti per Lettore di schede Dynex DX-CR112. Dynex DX-CR112 5. Lecteur de cartes mémoire sd/microsd
Anche per Dynex DX-CR112: Manuale (6 pagine), Manuale d'uso (11 pagine), Manuale d'uso (11 pagine), Manuale di configurazione rapida (2 pagine), (inglese) Guida dell'utente (11 pagine), (Francese) Manuale dell'utente (11 pagine)

Setup Questions

Question 1: How do I set up my card reader using Windows XP, Vista, or 7?

1. Remove the cap on one end of the card reader and plug the USB connector into an open

USB port on your computer.

2. Insert a card into the appropriate slot. The blue LED lights.

Caution: Cards must be inserted into the correct slot and in the correct direction; otherwise,

you may damage the card and/or the slot.

§ Cards must be inserted label side up into the SD slot.

§ Cards must be inserted label side down into the microSD slot.

3. Click Start, then click My Computer/Computer.

4. Double-click the appropriate drive to access the data on the memory card.

Question 2: How do I set up my card reader on a Mac?

1. Remove the cap on one end of the card reader and plug the USB connector into an open

USB port on your Mac.

2. Insert a card into the appropriate slot. The blue LED lights and a new icon appears on the

desktop.

Caution: Cards must be inserted into the correct slot and in the correct direction; otherwise,

you may damage the card and/or the slot.

§ Cards must be inserted label side up into the SD slot.

§ Cards must be inserted label side down into the microSD slot.

3. Double-click the new icon to access the data on the memory card.

Question 3: New Removable Disks do not appear in My Computer/Computer when I

connect my card reader to a Windows PC.

Make sure that your memory card is fully inserted into the slot on the card reader.

Make sure the card reader is connected to your computer. Unplug and reconnect your

USB cable.

Try a different memory card of the same type in the same slot. If a different memory card

works, the original memory card should be replaced.

Disconnect the USB cable from your card reader and shine a flashlight into the empty

card slots. Look to see if any pin inside is bent, then straighten bent pins with the tip of a

mechanical pencil. Replace your memory card reader if a pin has bent so much that it

touches another pin.

Unplug your card reader from the USB port and restart your computer. Reconnect your

card reader to your computer.

Your computer automatically installs the correct drivers. A new Removable

Disk drive appears in My Computer/Computer.