Galvin Engineering GalvinCare CP-BS Lead Safe 121.35.64.00 Installazione del prodotto - Pagina 4
Sfoglia online o scarica il pdf Installazione del prodotto per Prodotto idraulico Galvin Engineering GalvinCare CP-BS Lead Safe 121.35.64.00. Galvin Engineering GalvinCare CP-BS Lead Safe 121.35.64.00 4.
Stampa la pagina
Product Installation Guidelines
TROUBLESHOOTING
PROBLEM
Shower is dripping water
Inconsistent flow
Leak from behind body
Water is not flowing from tap
Rate of flow inadequate
WARRANTY
The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty
Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.
Galvin Engineering Pty. Ltd. hereby specifically disclaims all other warranties, express or implied, including but
not limited to the implied warranties of merchantability and fitness for a particular purpose.
alvin ngineering ty Ltd products are covered under our manufacturer's warranty available for download
from www.galvinengineering.com.au Galvin Engineering Pty Ltd expressly warrants that the product is free
from operational defects in workmanship and materials for the warranty period as shown on the schedule in
the manufacturer's warranty. uring the warranty period,
defective products manufactured by Galvin Engineering without charge, so long as the terms of the
anufacturer's warranty are complied with.
The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for
breach of warranty, and Galvin Engineering Pty Ltd shall not be responsible for any incidental, special or
consequential damages, including without limitation, lost profits or the cost of repairing or replacing other
property which is damaged if this product does not work properly, other costs resulting from labour charges,
delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions,
chemical, electrical or any other circumstances over which Galvin Engineering has no control. This warranty
shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or
alteration of the product.
CAUSE
Head-works are worn or
damaged
Blocked flow restrictor
Insufficient sealant
Water is turned off
The flow restrictor may not be
satisfactory due to inadequate
supply pressure
RECTIFICATION
Version 3, 2 February 2022, Page 4 of 4
Remove and inspect the head-works,
remove debris and/or replace head parts
if damaged
Remove flow regulator from body and
remove debris. Install an inline strainer
to stop further blockages.
Apply more sealant
Turn on water
Remove flow restrictor and replace with
a flow restrictor of different capacity to
suit (available from Galvin Engineering)
alvin ngineering will replace or repair any
Version 1, 2 February 2022, Page 4 of 4