AGS Merlin 1000SW+ Manuale di installazione e funzionamento - Pagina 3
Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Controllore AGS Merlin 1000SW+. AGS Merlin 1000SW+ 16. Gas, electric & water isolation controller
Anche per AGS Merlin 1000SW+: Installazione Funzionamento e manutenzione (12 pagine)
Stampa la pagina
Installation & Operation Manual
INSTALLATION
Planning
The Merlin 1000SW+ gas pressure proving, electric and water isolation system is designed
specifically for use in educational establishments and laboratories.
This panel is to be used to carry out a gas proving test on the pipe work in order to highlight if
there is a gas appliance open or a gas leak in a laboratory. The Merlin 1000SW+ is designed
to give the teacher full control over the incoming gas supply, bench electrics and water
supply with the lockable main key-switch and touch sensors.
The Merlin 1000SW+ can work in conjunction with carbon dioxide, natural gas, carbon
monoxide and LPG sensors. The Merlin 1000SW+ also has a built in "timeout" facility which will
automatically shut off the gas solenoid valve at the end of a specific time period, this time
period can be adjusted to 2, 5, 8 hours or can be overridden if required.
Please refer to your detector manual for important information regarding coverage,
location and positioning including areas and conditions to avoid.
Placing the panel at eye level allows for optimum monitoring of LED Indicators.
Fixing - Mounting
Unpack all the parts!
1. Carefully remove the front cover from the unit by unscrewing the four bolts located at each
corner. To do this – use the socket wrench provided.
2. Mark the four screw holes located on the back of the enclosure to the wall. Ensure the wall
surface is flat to prevent base distortion.
3. After executing the mounting and the connections – replace the front cover and insert the
security caps over the four bolts.
Be careful when creating access for cables – Damage to boards will void any warranty.
Carefully remove the circuit board before drilling cable entry holes.
A flush mount kit is available, comprising of a mounting bracket and decorative surround strip.
Contact your supplier for more information.
1000SW+ IOM Rev: 09
01-20
Merlin 1000SW+
3