AGS DPM2 Manuale - Pagina 3
Sfoglia online o scarica il pdf Manuale per Strumenti di misura AGS DPM2. AGS DPM2 4. Dual pressure monitor
Stampa la pagina
AGS DPM2
LED Status
Power
When the DPM-2 is connected to the Merlin panel and panel is connected to the mains supply, this LED
will illuminate red.
Pressure sensor 1
Under normal working conditions this LED is green.
When the panel detects a gas leak or pressure lower than 0.17psi the LED will illuminate red.
GREEN = OK
RED = gas leak or pressure below 0.17psi
Pressure sensor 2
Under normal working conditions this LED is green.
When the panel detects a gas leak or pressure lower than 0.17psi the LED will illuminate red.
GREEN = OK
RED = gas leak or pressure below 0.17psi
Specification
Product:
Power Input Voltage
Valve Output Voltage
Fuse
Operating Temperature
Wire ratings
Pressure Sensor Operating Pressure
Important Warning Statements
Never ignore your device when in alarm.
This device should not be used to substitute proper installation, use and/or maintenance of fuel burning
appliances including appropriate ventilation and exhaust systems.
Your product should reach you in perfect condition, if you suspect it is damaged, contact your supplier.
Rev 04
09-20
DPM2
110-120Vac
110-120Vac
3.15A Anti Surge 250Vac
32 – 122°F 30-85%RH Non-Condensing
Min. 18AWG
0-1.45psi (0-100mbar)
User Guide
3