GAM CUOCOJET Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Cutter GAM CUOCOJET. GAM CUOCOJET 8. Vegetable-cutting machine

SECTION 1 GENERAL INFORMATION

IDENTIFICATION OF THE MACHINE

These instructions for use and maintenance relate to the following machine model:

"CUOCOJET" VEGETABLE-CUTTING MACHINE

A machine designed for cutting vegetables of all kinds, for use with foodstuffs only. On account of its design and features,

it can be installed in any workshop and used by commercial operations but it is not designed for industrial use.

MANUFACTURER:

The identification plate is attached at the rear of the machine on the left- hand side, close to the outlet of the power cable.

The data indicated in the identification plate are as follows:

TECHNICAL CHARACTERISTICS

Average production capacity

Operation voltage

Installed power: single-phase

Installed power: three-phase 230

Installed power: three-phase 400

Net weight

Average noise level

Overall dimensions

Dimensions of packing

Overall weight

USES OF THE MACHINE

This machine is a high-performance cutter suitable for chopping all types of vegetables.

EQUIPMENT AND SPECIAL ACCESSORIES

The basic model of the machine includes the supply of the following devices and materials:

− 1 high-ridge expulsion disk - no. 7 in exploded view

− 1 low-ridge expulsion disk - no. 7 in exploded view

− 1 vegetable presser (pestle) - no. 38 in exploded view

− 1 copy of the spare parts catalogue with exploded view

− 1 copy of the instructions and maintenance manual

− 1 warranty certificate (to be validated by sales agent/retailer),

which must be returned within 8 days of purchase to the Builder

The safety measures and devices mentioned above conform to prescribed

standards in European regulations EEC 89/392 - 94/44 - 93/68.

ELECTRIC WIRING

The electric wiring of the machine is designed according to the technical regulations in CEI EN 60204-1 CEI 44- 6 section

1364, which refer to electrical parts and equipment in industrial machinery cf. Part 2 - Designation of the components and

examples of drawings, diagrams, tables etc.

A copy of this document is included as an appendix in this instructions manual.

WARNINGS AND INSTRUCTIONS REGARDING SAFETY

Please read the following warnings very carefully. Anyone who uses this machine must have read and be fully aware of

their content.

Remember that instructions or warnings cannot replace industrial safety regulations and really act as a back-up measure,

reminding operators to respect the regulations, which must be observed at all times.

FAILURE TO OBSERVE ANY INSTRUCTIONS AND SAFETY REGULATIONS AND IMPROPER USE OF MACHINE

NOISE LEVELS

Average values recorded at the main place of operation according to DIN 45635/a.

Noise level while switched on 53 dB(A)

Noise level during operation 65 dB(A)

415010 en ma 2017-02

WARNINGS ALONE WILL NOT ELIMINATE THE RISK OF DANGER

MAY LEAD TO INJURY OF THE OPERATOR.

about 200 kg/hr

240-415V AC - 50 Hz

240V 50Hz 0.55kW (0.75HP) 3.5A

240V 50Hz 0.55kW (0.75HP) 1.8A

415V 50Hz 0.55kW (0.75HP) 1.0A

20 kg

58 dB (A)

(length/depth/height) 23,5 x 52,5 x 57 ,0 cm

(length/depth/height) 32,0 x 60,0 x 53,0 cm

22 kg

4/8