Dynojet POWER VISION 4 Manuale di installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione per Accessori per moto Dynojet POWER VISION 4. Dynojet POWER VISION 4 10. 2018 can-am x3 900 ho 2017-2022 can-am x3 turbo 2017-2022 can-am x3 turbo r 2020 can-am x3 turbo rr 2018-2021 can-am maverick trail 800 2018-2023 can-am maverick trail 1000 2019-2023 can-am maverick sport 1000 2015-2018 can-am maverick 1000r 2015-2017 can
Anche per Dynojet POWER VISION 4: Manuale di installazione (14 pagine)

Stampa la pagina
Dynojet POWER VISION 4 Manuale di installazione

TROUBLESHOOTING

A few of the more common troubleshooting topics are listed below. For more topics visit the
For additional help, please contact
UNABLE TO CONNECT TO BLUETOOTH
1
Verify you are within range.
2
Turn Bluetooth off and then on again.
3
Restart your phone. Restart the Power Vision 4.
4
Have your phone "forget" the Power Vision 4.
5
Clear the Bluetooth cache.
PHONE WILL NOT CONNECT TO POWER VISION 4
Location permission is required for the app to access the
phone's Bluetooth hardware.
1
Locate the Dynojet Power Vision 4 app on your phone.
2
Long-press the app until the context menu appears.
3
Press App Info or the
4
Press Permissions.
5
Verify Location and Storage are both allowed.
ERROR FLASHING
1
Verify the Power Vision 4 app is up to date through either
the Apple App Store or Google Play Store.
2
Connect the Power Vision 4 to your bike.
3
Verify the fi rmware is up to date.
4
Install the fi rmware update(s) if available.
5
Contact
Dynojet Technical Support
HOW TO RECOVER THE ECU
You may need to recover the ECU if the fl ash was
interrupted leaving the ECU in an incomplete fl ash state.
1
The Power Vision 4 will ask you to recover the ECU. Press
OK. This will automatically fl ash the stock (.stk) fi le.
2
If the Power Vision 4 does not automatically fl ash the
stock (.stk) fi le, you will need to manually choose a stock
(.stk) fi le from your tunes. Ideally, this would be the stock
(.stk) fi le you saved from your initial read.
3
Once the ECU is recovered, you will need to re-fl ash your
tune.
HOW TO UPDATE THE FIRMWARE
1
Every time you connect to the Power Vision 4, the device
automatically checks for new fi rmware. If newer fi rmware
is found, the Power Vision 4 will ask you to update the
device.
2
Press Yes to update the device.
3
You must update the device to continue. If you choose
not to update the device, the app will close.
Dynojet Technical
icon.
if the error persists.
Support.
HOW TO MANAGE EXISTING TUNE LICENSES
Manage your existing Tune Licenses on the Dynojet
website.
1
Log in to your
Dynojet.com
account you used to log in to the Power Vision 4 app.
2
Click My Account in the top, right corner of the browser.
3
Click Tune Licenses.
NO TUNE LICENSE AVAILABLE
Your new Power Vision 4 comes with one available tune
license. Before you can fl ash additional vehicles, you will
need to purchase additional tune licenses.
1
Log in to your
Dynojet.com
2
Click My Account>Tune Licenses. View your purchased
licenses. This will also show you which VIN the license
fi le is associated with.
3
Purchase additional tune licenses to use with additional
vehicles.
HOW TO PURCHASE A TUNE LICENSE
Through a Tune License, you can unlock the true
potential of your Dynojet Power Vision 4. Your Power
Vision 4 will be able to tune the original vehicle, as well
as additional vehicles. Your Power Vision 4 device will
remember each license that is applied, essentially
multiplying the power of your device.
Each license is vehicle specifi c, not device specifi c,
allowing you to load a Tune License onto any number of
Power Vision units you have.
1
Visit https://www.dynojet.com/tuning-licenses/.
2
Log in to your Dynojet account.
3
Select the Tune License for the vehicle you wish to
purchase and add to your cart.
4
Check out following the prompts.
UNABLE TO LOG INTO MY DYNOJET ACCOUNT
1
Verify there is not a typo in your email or password.
2
Verify you have entered your full email address.
For example, "[email protected]" instead of
"username@dynojet."
3
Passwords are case sensitive. Verify caps lock is turned
off.
4
Refresh your browser and try signing in again.
5
Did you forget your password? Click Forgot my
password and follow the prompts.
6
Still having trouble, contact
Dynojet Knowledge
account using the same
account.
Dynojet Technical
Support.
Base.
9