AFL IDEAA 144F Manuale di istruzioni per l'installazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Involucro AFL IDEAA 144F. AFL IDEAA 144F 14.

Stampa la pagina

PACKAGE CONTENTS:

ACCESSORIES

Wall Mounting Hardware Kit

LGX-118 Mounting Bracket Kit

Replacement Door Label Kit

Input Compression Fitting Kit

REQUIRED TOOLS

216 style Socket Tool

Phillips Head Screwdriver

CABINET MOUNTING – WALL

MOUNT BRACKET ATTACHMENT

1. Locate the three bracket mounting positions on the

back of the 144F IDC. (Figure 1)

2. Using a standard 216 style tool, or similar, attach

the three wall mount brackets included in the Wall

Mounting Hardware Kit. (Figure 2)

CABINET MOUNTING – WALL MOUNT

1. Using local engineering practices, determine the

mounting position of the cabinet on the wall.

2. Mark the three mounting points to be pre-drilled for

cabinet placement.

3. Using local accepted practices and approved

hardware, insert a lag screw into each of the three

pre-drilled mounting holes. Screw the lag screws

half-way into the wall.

Note: For best practice, it is recommended that

the lag screws hex head is wider than the key

slots of the cabinet mounts. Also, ensure that

the shaft of the screws is smaller than the actual

mounting slots for ease of installation.

4. Mount the cabinet over the pre-installed lag screws.

5. Secure the cabinet to the wall by tightening the three

lag screws. Before the lag screws are completely

tightened a level may be used to ensure that the

cabinet is in the desired position.

INSTALLATION INSTRUCTIONS

ADD-ON COMPONENTS

SC IDEAA Module – 1 x 32

Universal Splice Tray

Compression Fitting Kit

FUSEConnect

MPO Splice-On Connector

FASTConnect

Mechanical Connectors

MPO Pigtail Kit

One-Click

SC Cleaner

One-Click

MPO Cleaner

IDEAA

Interior Distribution Cabinet

Bracket

Positions

Figure 1

Figure 2

Specifications are subject to change without notice.