GAMA Electronics LRF12V1C-WPTX Manuale di istruzioni - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per Ricevitore GAMA Electronics LRF12V1C-WPTX. GAMA Electronics LRF12V1C-WPTX 4.
WWW.GAMAINC.COM
All remote-control systems shipped by GAMA Electronics are 100% functionally tested just prior to shipment.
If your RF remote control system does not work out of the box, stops working or functions intermittently please take the
following steps to resolve common issues. Please note that you must be 2-3 feet away from the receiver when operating
the remote control. Operating within 2-3 feet may result in no operation or intermittent operation.
1. Replace the A23 12V Battery in the transmitter
·
The remote control can activate during shipping and drain the battery that is installed in the control. We
send a replacement battery with the system if this occurs.
2. Check the voltage supply at the receiver
·
The receiver is designed to function at 10VDC-15VDC. Voltage on the (+) and (-) terminals on the control
should be within this range.
3. Reprogram the remote control
·
If the system is non-functional try to reprogram the remote control. The program may not have taken
during the programming process or the program button may have been pressed. If the program button is
pressed the memory of the remote controls programed to the receiver are erased.
4. Listen and look for functionality on the receiver.
·
The LED that is used for programming the system will illuminate when the receiver is activated. You will
also hear a "click" when the internal relays engage. If you can see the LED illuminate and you hear the
relay "click" the issue is most likely in the wiring or device being controlled.
5. Add a long-range antenna
·
If the receiver is in an area that is averse to the reception of an RF signal, such as near a motor or in a
metal casing, a long-range antenna may solve the issue. Connect the antenna per the instructions on
page 3 and mount the antenna in an exposed area away from any motor.
Troubleshooting
RFR12V1C
Instruction Manual
Page 4 REV C 07/22/20