AFL HIBUS HCS Series Procedure di installazione - Pagina 2

Sfoglia online o scarica il pdf Procedure di installazione per Strumenti AFL HIBUS HCS Series. AFL HIBUS HCS Series 4. Conductor suspension clamp

Stampa la pagina
Preparation
Prior to making connection, the conductor and accessory must be clean. Check accessory groove(s) and bushings for foreign particles, removing if
present.
Installation
HIBUS Conductor Suspension Clamp Assembly Installation Parts List:
ITEM
DESCRIPTION
-
HIBUS Conductor Suspension Assembly
1-1
HIBUS Conductor Suspension Clamp - RH
1-2
HIBUS Conductor Suspension Clamp - LH
2
1/2" Clamping Bolt
3
1/2" Belleville Spring Washer
4
1/2" Flat Washer
5
Bushings
6
O-Rings – Bolt Retainer
7
5/8" Attachment Clevis Pin
8
5/8" Flat Washer - optional
9
Cotter Pin
-
Socket Eye – Type SA – supplied by Customer
1.
Remove attachment hardware from HIBUS Suspension Clamp as shown in Fig. 1.
5/8" FLAT WASHER
Fig. 1
(OPTIONAL)
5/8" ATTACHMENT
CLEVIS PIN
2.
Loosen Clamping Bolts (items 2, 3, 4 and 6) to allow the HIBUS Suspension Clamp to hinge open. Squeeze the "ears" (top of the
HIBUS Suspension Clamp) to open as shown in Fig. 2.
Fig. 2
1/2" CLAMPING BOLT
1/2" BELLEVILLE SPRING
WASHER
1/2" FLAT WASHER
O-RING
www.AFLglobal.com or (800) 866-7385
MATERIAL
-
Aluminum
Aluminum
SS
SS
SS
Elastomer
BUNA-N
Galv. Steel
Galv. Steel
SS
-
COTTER PIN
5/8" FLAT WASHER
(OPTIONAL)
HIBUS SUSPENSION CLAMP
HIBUS SUSPENSION CLAMP SHOWN WITH
HINGE OPEN AND "EARS" SQUEEZED
2
Installation Instructions
HCS-INSP001
QTY
-
1
1
2
2
2
4
2
1
2
1
-
© 2012, AFL, all rights reserved. Revision 1, 4.30.14
Specifications are subject to change without notice.