Dynojet Power Vision Manuale di installazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di installazione per Sintonizzatore Dynojet Power Vision. Dynojet Power Vision 7. For 2019-2022 can-am ryker 600/900
Anche per Dynojet Power Vision: Manuale di avvio rapido (17 pagine), Manuale di installazione (6 pagine), Manuale di installazione (8 pagine), Manuale di installazione (7 pagine), Manuale (7 pagine), Manuale di installazione (7 pagine), Manuale di installazione (7 pagine)

Stampa la pagina
Dynojet Power Vision Manuale di installazione

GETTING STARTED

Use the Tune File Wizard to prepare your Power Vision
device with the stock (stk) and tune (djt) files needed to
flash your vehicle.
1
Connect the Power Vision to the vehicle.
2
Turn the key on. The Power Vision will scan for files.
There are three possible file states:
File State 1: No compatible tune or stock files.
File State 2: No compatible tune files.
File State 3: All required files found.
3
Gauges are displayed.
Connect the Power Vision to the
vehicle diagnostic port to collect
ECU information. Turn the key on.
FLASHING YOUR VEHICLE
The Power Vision must be paired to the connected vehicle ECU
to function properly.
Note: Once paired to the vehicle ECU, the Power Vision will
not work on another vehicle without purchasing a tune
license.
1
From the Main Menu, select Flash Tune.
2
Select the tune file (.djt) and press Enter to view the Tune Info.
Note: The Dynojet tune file (.djt) is a tune file which is
different (better than stock performance or the necessary
file when bolting on an exhaust, for example); the stock file
(.stk) is the direct duplicate of what the OEM shipped.
3
Press Enter to accept the tune, or restore the ECU to original
stock (.stk) file, and pair the Power Vision to the vehicle.
Note: Pair to vehicle will only happen on the first flash.
4
Press Enter to pair and lock the Power Vision to the ECU and to
begin the flash. Do not turn off the key switch or disconnect the
Power Vision during the flash.
5
After the flash is complete, turn the key off and wait 45 seconds
before turning the key back on to start.
File State 1:
Go to
tunes.dynojet.com/
download stock and tune files.
File State 2:
Go to
tunes.dynojet.com/
download tune files.
File State 3:
All required files found. The Power
Vision is ready to flash a tune to the
connected vehicle.
to
to
3