Maine Cottage MC1805 Istruzioni per il montaggio - Pagina 3
Sfoglia online o scarica il pdf Istruzioni per il montaggio per Arredamento per interni Maine Cottage MC1805. Maine Cottage MC1805 4. Bunk bed
STEP ONE:
ASSEMBLE BOTTOM BUNK BED
PARTS LIST
Position Headboard in the desired location of
A.
the room, using a wall to support if necessary.
Attach one Side Rail to the Headboard and
then the other Side Rail to the Headboard.
STEP TWO:
CONNECT THE SECOND HEADBOARD
Connect the second Headboard the same
way as the first Headboard was connected.
Yes, there will be two headboards on the
Bottom Bunk!
STEP THREE:
STEP THREE:
STACK ON THE TOP BUNK
STACK ON THE TOP BUNK
Move assembled bottom bunk into permanent
Move assembled bottom bunk into permanent
location, lifting only by headboard and foot-
location, lifting only by headboard and foot-
board. Lifting by the Side Rails will disengage
board. Lifting by the Side Rails will disengage
the locked buttons. Check for square and en-
the locked buttons. Check to make sure bed
sure that all brackets are fully connected and
is square and ensure that all brackets are fully
that the slats are still in their correct positions.
connected. Put a metal connector into the hole
Put a metal connector into the hole on top of
on top of each Headboard Post.
each Head Board Post.
Note the numbers next to the holes on the bed.
Note the numbers next to the holes on the
Place both corresponding Footboards on top
bed. Place both corresponding footboards on
of their sister Headboards. Attach the two side
top of their sister headboards. Attach the two
rails just as you did with the bottom bunk in
side rails just as you did with the bottom bunk
step one.
in step one.
BUNK BED ASSEMBLY INSTRUCTIONS
NOTE: We recommend two people assemble our Beds.
To attach the Side Rails, align the metal male
B.
component on the Side Rail with the female
component on the metal bracket on the Head
Post. Press down until it "clicks" into place.
866-366-3505 M-F, 9-5
It is recommended to attach both
It is recommended to attach both Side
C.
C.
Side Rails to the Head Board first then
Rails to the Headboard first then repeat the
repeat the connections on the opposing
connections on the opposing Headboard.
Headboard.
Metal Bunk Connector
866-366-3505 M-F, 9-5