Gama Sonic Imperial Bulb II Manuale di istruzioni - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per Lanterna Gama Sonic Imperial Bulb II. Gama Sonic Imperial Bulb II 4.

Stampa la pagina

Assembly Instructions

NOTE: If you are replacing an existing gas/

electric post light, you must consult a

certified technician to disconnect them

before installation.

• Remove the top (C) from the fixture (D) by

unscrewing the four screws.

• Install the GS Solar LED Bulb into the top (C)

by twisting it clockwise. Be sure to hold the

bulb by its base.

• Turn the lamp on using the operation switch

located on the underside of the top (C).

• Re-install the top (C) back to the fixture (D)

by tightening the four screws.

• Install the desired finial (A or B) to the top

• Place the lamp on your existing 3" pole and

secure with the provided set screws.

NOTE: Be sure to not overtighten the screws.

3" pole

page 3

or B

Operation Instructions

1. Install the GS Solar LED Bulb in the top

(C).

2. Locate the operation switch on the

underside of the top (C).

3. Turn the operation switch to the Low

or High position according to your

preferences:

- Low = Softer light and longer duration

- High = Brighter light output

The solar Lamp will automatically operate

at dusk.

Replacement Parts

Replacement Batteries and Bulbs are

available at www.gamasonic.com or via

our Toll Free number: +1-800-835-4113.

Your Lamp can use the following bulbs:

A60WW20W – included bulb with Warm

White LEDs (2700K)

A60BW20W – bulb with Bright White

LEDs (6000K)

F30WW05W –Flame bulb with simulated

flame LEDs

T45WW10W – Edison LED Bulb with

Warm White LEDs (2700k)

Your Lamp uses two of the following

battery:

GS32V30

This lamp has the option to use two additional

batteries which can help extend duration if the

lamp receives more than four hours of direct

sunlight.