Gama Sonic 203001 Manuale di istruzioni - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per Luce a diluvio Gama Sonic 203001. Gama Sonic 203001 6.

Our flood light boasts multiple installation options. These instructions will explain how to

assemble the different pieces to each other. Please use this as a guide and choose the mounting

option/combination that works best for your situation.

Step 1. Mounting Bases to lamp and/or solar panel

This product comes with two stake mounts (Part D) and one ﬂat mount (part E). Choose the one(s)

that ﬁt best for your desired mounting loc

that ﬁt best for your desired mounting location.

page 3

1. Part A can be attached to Part F (Fig. 1) or G (Fig. 2) by sliding

the tapered end of the wedge into the groove at the bottom

of the lamp or solar panel. NOTE: Push the part into the groove

ﬁrmly so it does not easily slide out and tighten set screw.

2. Attach Part A to Part D or E (Fig. 3) and secure by screwing Part

H clockwise into the threaded section.

3. You can adjust the angle of the completed assembly by

loosening the screw (Part H) and tilting the product to the

desired angle. Re-tighten Part H to secure product in the new

position.

4. If you plan to attach one of the mounting bases to both the lamp

and solar panel, repeat steps 1-3 to have a mount for each of Part

F and G.

5. If using Part E, drill two holes into your mounting location using

the base as a template. Secure the base using the hardware in

the package (Part J).

6. If using Part D, ﬁrmly insert the stake into the ground of the

desired location.

Fig. 1

Fig. 2

continue

Fig. 3