aireRyder Cyrus Manuale di istruzioni per l'installazione e l'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione e l'uso per Ventilatore aireRyder Cyrus. aireRyder Cyrus 6.
Stampa la pagina
Fig. 9
Hanger Bracket
Screw
Washer
Attach the canopy to the hanger
bracket, then secure it with four
screws and washers.
Switch Box
Screw
Switch Box Cover
Fan Light Installation:
Switch Box
Female Terminal
Male Terminal
F
A
N
C
O
161031
Blade Screw
Rubber Washer
Blade
Canopy
Fig.10
Thread the blade screws through the
rubber washer blade bracket and blade
into the decorative cap. Tighten all blade
screws securely. Repeat on other blades.
Fig.12
Install without fan light
Make sure the wires of the fan light in
the switch box are capped.
Secure the switch box cover with
the switch box screws.
To install the fan light, skip this step
and proceed to Fig.13.
Make wire connection:
-- Connect the blue wire from the switch box to
blue wire from the fan light by inserting male
terminal into female terminal.
-- Connect the red wire from the switch box to
red wire from the fan light by inserting male
terminal into female terminal.
Carefully put the wires into the switch box.
Fan Light
Fig.13
Motor Screw
Washer
Blade Bracket
Blade Bracket
Decorative Cap
Remove the motor screws and washers
from the motor assembly. Secure blade
brackets to the motor with washers and
motor screws.
Secure the fan light onto the switch
box by using the switch box screws.
Fig.11
Switch Box
Screw
Fig.14
4