aireRyder F0029 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Ventilatore aireRyder F0029. aireRyder F0029 8. Original ceiling fan

Stampa la pagina

INSTALLATION INSTRUCTIONS

IMPORTANT:

BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE

SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN

DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

SAVE ALL INSTRUCTIONS.

NOTE: The fan weight is 24.2 lbs (10.9 kg). Be sure the outlet box you are using is securely attached to the building

structure and can support the full weight of the fan. Failure to do so can result in serious injury.

Installation Steps :

Fig.1

Turn OFF the electric power at the

main fuse or circuit breaker box.

Fig.3

Lock Pin

Hanger Pin

Remove the Lock Pin and take off

the Hanger Pin.

Fig.6

Collar Screws

Insert and tighten the two Collar

Screws. Slide Lock Pin into Hanger

Pin until it locks into position.

Wood Member

(2" x 4" Approx.)

Ceiling

Attach the hanger bracket to the outlet box with 2 mounting screws. (To reduce

the risk of fire, electric shock, or personal injury, mount to an outlet box marked

"Acceptable for fan support" and use mounting screws provided in assembly kit.)

Attach the "J" hook to the ceiling, and make sure the "J" hook on the outside of

the fan canopy.

Note: For slope ceiling installation, make sure that the chip of the hanger bracket

is toward the floor.

Fig.4

Motor Wires

Collar

Slide canopy, canopy cover and

downrod stand cover onto downrod,

as shown; Then thread motor wires

through downrod.

Fig.7

Lock Pin

Hang fan on hanger bracket, and rotate the downrod until the chip on

the hanger bracket snaps into the slot on the hanger ball.

Note: For slope ceiling installation, make sure the slot of hanger ball

and the chip of hanger bracket are toward the floor.

Ceiling Joist

Outlet Box

Hanger Bracket

Fig.2.

Fig.5.

Downrod

Canopy

Canopy Cover

Downrod Stand

Cover

Hanger Bracket

Slot

Chip

PAGE: 5/8

Wood Member

Ceiling Joist

(2" x 4" Approx.)

Ceiling

"J" Hook

Fig.5

Motor Wires

Hanger Pin

Insert the Downrod into the Collar.

Slide Hanger Pin through holes of

Collar and Downrod.

Outlet Box

Hanger Bracket

140819