aireRyder F0061 Manuale - Pagina 5
Sfoglia online o scarica il pdf Manuale per Ventilatore aireRyder F0061. aireRyder F0061 10.
Stampa la pagina
INSTALLATION INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE
SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN
DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
SAVE ALL INSTRUCTIONS.
NOTE: The fan weight is 15.21 lbs (6.9 kg). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failure to do so can result in serious injury.
Installation Steps :
Fig.1
Turn OFF the electric circuit at the
main fuse or circuit breaker box.
Fig.3
Lock Pin
Hanger Pin
Remove the Lock Pin and take off
the Hanger Pin.
Fig.6
Collar
Screws
Insert and tighten the two Collar
Screws. Slide Lock Pin into Hanger
Pin until it locks into position.
Outlet Box
Hanger
Bracket
Fig.2
Fig.4
Motor Wires
Collar
Slide canopy, canopy cover and
downrod stand cover onto downrod,
as shown; then thread motor wires
through downrod.
Fig.7
Lock Pin
Hang fan on hanger bracket, and rotate the downrod until the chip on
the hanger bracket snaps into the slot on the hanger ball.
Note: For slope ceiling installation, make sure the slot of hanger
ball and the chip of hanger bracket are toward the floor.
Chip
Downrod
Canopy
Canopy Cover
Downrod Stand
Cover
Hanger Bracket
Slot
Chip
PAGE: 5 / 10
Tighten the hanger bracket to the outlet
box with 2 mounting screws. (To reduce
the risk of fire, electric shock, or personal
injury, mount to the outlet box marked
"Acceptable for fan support" and use
mounting screws provided with the outlet
box.)
Note: For slope ceiling installation, make
sure that the chip of the hanger bracket
is toward the floor.
Fig.5
Motor Wires
Hanger Pin
Loosen the collar screws part way.
Insert the Downrod into the Collar.
Slide Hanger Pin through holes of
Collar and Downrod.
F
A
N
C
O
181128