HIKOKI C361395R Manuale di istruzioni per la movimentazione - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per la movimentazione per Trapano HIKOKI C361395R. HIKOKI C361395R 16.
Stampa la paginaSYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
DH26PMX: Rotary Hammer
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU
on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Rated voltage
Ensure that the power source to be utilized
V
conforms to the power requirements specifi ed
on the product nameplate.
P
Power Input
n
No-load speed
0
Bpm
Full-load impact rate
φ
Drilling diameter, max.
max
Weight
kg
(According to EPTA-Procedure 01/2014)
Concrete
Steel
Wood
Rotation and hammering function
Rotation only function
Hammering only function
Switching ON
Switching OFF
Disconnect mains plug from electrical outlet
Class II tool
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
○ Plastic case ................................................................ 1
○ Side handle ................................................................. 1
○ Depth gauge .............................................................. 1
○ Drill chuck holder ....................................................... 1
Standard accessories are subject to change without notice.
APPLICATIONS
Rotation and hammering function
○ Drilling anchor holes
○ Drilling holes in concrete
○ Drilling holes in tile
Rotation only function
○ Drilling in steel or wood
○ Tightening machine screws, wood screws
Hammering only function
○ Light-duty chiselling of concrete, groove digging and
edging.
SPECIFICATIONS
The specifi cations of this machine are listed in the Table on
page 9.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
MOUNTING AND OPERATION
Action
Inserting SDS-plus tools
Removing SDS-plus tools
Selecting rotation direction
Selecting the operating mode
Adjusting the drilling depth
Changing the chisel position
Removing the quick release
chuck*
1
Inserting the quick release chuck
Inserting round shank applications
tools
Switching on and off and setting
the speed
Locking-on the On / Off switch
Releasing the On / Off switch
Installing the side handle
Selecting accessories*
*1 If it is hard to pull out the drill chuck holder or the drill bit
holder, align the change lever with the
the lock grip.
*2 For detailed information regarding each tool, contact a
HiKOKI authorized service center.
7
Figure
1
2
3
4
5
6
7
8
9
10
11
12
14
–
2
mark and turn
Page
2
2
2
2
2
2
3
3
3
3
3
4
4
10