aireRyder FE22YA Manuale - Pagina 9

Sfoglia online o scarica il pdf Manuale per Ventilatore aireRyder FE22YA. aireRyder FE22YA 9.

Stampa la pagina
REMOTE CONTROLLER WIRING CHART
Warning:
Before installing Remote Controller, make sure the Main Power
Supply is turned off.
AC:110V~130V/60Hz
LIGHT: 120W (MAX)
FAN: 95W (MAX)
Step 1: Make wire connection.
Step 2: Set Frequency before making wire connection.
There is a frequency setter in transmitter and receiver (See Fig 1.).
First, set all of the 4 keys at "ON" position. If more than one remote
controlled fan is installed or the frequency interfered, the fan may
function abnormally. In this situation, you need to reset the fan
frequency as per following instructions.
1. Adapt the canopy to the hanger bracket.
2. Please use a ball pen (or any convenient tool) to poke
keys to select a desired frequency mode which will not
interfere with other electrical units. There are 15 frequency
modes for selection excluding the original ex-factory
mode (See Fig 2. ).
NOTE: Do not set the remote controlled fans at the same
frequency in the same building.
3. Install a 9V battery (not included) into the transmitter.
4. Turn on the power.
5. Press button to operate the fan.
Please note to change the frequency-setters in the transmitter
***
& receiver at the same time & at the same key position.***
1). When 1 key is in "OFF" position.
2). When 2 keys are in "OFF" position.
3). When 3 keys are in "OFF" position.
4). When 4 keys are in "ON" or "OFF" position.
Neutral Wire From
Outlet Box
(
White Wire
White Wire
Red Wire
"AC IN N" sticker
Receiver
Key
Key
4
2
3
4
1
2
3
4
1
2
3
1
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
4
1
2
3
1
2
3
4
Hot Wire From
Outlet Box
(
Black Wire
)
Red Wire
with
"AC IN L" sticker
Fan
ON DIP
ON DIP
"ON" position
"OFF" position
2 2 3 3 4 4
1 1
FREQUENCY SETTER
(Ex-Factory Mode)
LIGHT
L I G H T
H I
HI
M E D
MED
L O W
LOW
O F F
OFF
R E M O T E
C O N T R O L
2
3
4
1
2
3
4
1
)
with
Ground Wire
(
Green Wire
)
( Fig 1.)
( Fig 1.)
( Fig 2.)
( Fig 2.)