aireRyder FN42253 Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Ventilatore aireRyder FN42253. aireRyder FN42253 9.

Stampa la pagina

INSTALLATION INSTRUCTIONS

IMPORTANT:

BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE

SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN

DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

THIS FAN MUST BE INSTALLED WITH A WALL CONTROL/SWITCH.

SAVE ALL INSTRUCTIONS.

NOTE: The fan weight is 21.6 lb (9.8 kg). Be sure the outlet box you are using is securely attached to the building

structure and can support the full weight of the fan. Failure to do so can result in serious injury.

Installation Steps :

Fig.1.

1.Turn off the electric power at the

main fuse or circuit breaker box.

Downrod

Downrod Stand

Cover

Fig.3.

3.Thread the motor wires through the

downrod stand cover, canopy and

downrod in order.

Wood Member

(2" x 4" Approx.)

Ceiling

2. Tighten the hanger bracket to the outlet box with two mounting screws.(Make

sure the outlet box is securely installed so that it will be able to support

at least the fan weight.) Attach the safety cable hook to the ceiling with the

dry wall screw and washer, and make sure the safety cable hook is covered

by the fan canopy.

WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED

Canopy

Fig.4.

4.Insert the hanger pin through the

holes in the collar and downrod.

Insert the lock pin through the hole

near the end of the hanger pin until

it snaps into its locked position.

Ceiling Joist

Junction Box

Hanger Bracket

Fig.2.

Fig.5.

"ACCEPTABLE FOR FAN SUPPORT"!

Lock Pin

Hanger Pin

Page: 2 / 6

Wood Member

Ceiling Joist

(2" x 4" Approx.)

Ceiling

Washer

Dry Wall Screw

Safety Cable Hook

Collar

Fig.5.

5.Tighten the downrod screws on the

collar.

060228

Junction Box

Hanger Bracket