Deaf Bonce AAP-1600.1D Manuale d'uso - Pagina 10
Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Deaf Bonce AAP-1600.1D. Deaf Bonce AAP-1600.1D 20. Mono amplifiers
8 . P O S S I B L E F A U L T S A N D T H E I R S O L U T I O N S
Deaf Bonce amplifiers are high-quality and technically perfect products. The problems often arise due to improper use, faulty
connection of components or lack of power supply of the on-board network.
1) The amplifier does not turn on.
Problem solution: Check all the contacts and the presence of 9-15 V at the amplifier terminals. Check whether the control input
of the amplifier "REM IN" receives the positive potential of +12 V.
2) Power turns on, but goes into protection (protection indicator lights up)
Problem solution: Check if there is a short circuit (fault) on the amplifier output which is connected to the speakers or
subwoofers. Make sure that commutation of the voice coils of the subwoofer is correct. The rated impedance of the voice coils
should not be lower than the permissible rated load impedance of the amplifier. Check the supply voltage of the amplifier. It must
be within the range of 9-15 V.
3) The amplifier turns on but at a high volume it goes in to protection. Problem solution: The amplifier may lack power. Make
sure that the rated current of the alternator and the battery capacity is enough to power this amplifier.
Check the amplifier for overheating. Check the load impedance.
4) The amplifier is turned on, but there is no sound from the speakers or subwoofer.
Problem solution: Check the connection of the amplifier, the integrity of the interconnecting cable, HU, the speakers or the
subwoofer.
9 . B O X c o n t e n t s
1. Amplifier – 1 pc.
2. Owner's manual – 1 pc.
3. Warranty card – 1 pc.
4. Remote control – 1 pc.
5. Mounting Kit – 1 pc.
1 0 . W A R R A N T Y A N D M A I N T E N A N C E I N F O
Deaf Bonce products are warranted against defects concerning materials and their manufacturing under normal functioning
conditions.
While the product is under warranty, defective parts will be repaired or replaced at the manufacturer's discretion. The
defective product, along with notification about it, must be returned to the dealer from which it was purchased together with the
warranty certificate duly filled in,
repaired at the current costs.
Our company does not undertake any liability for damages due to transportation. Our company does not take any
responsibility for: costs or loss of profit due to the impossibility to use the product, other accidental or consequential costs,
expenses or damages suffered by the customer. Warranty according to laws in force.
For more information visit our website and carefully read warranty card.
The manufacturer reserves the right to change design and specification without prior notice.
1 1 . I N F O R M A T I O N O N D I S P O S A L O F T H E E L E C T R I C A L A N D
E L E C T R O N I C E Q U I P M E N T ( F O R T H E E U R O P E A N C O U N T R I E S W I T H
S E P A R A T E W A S T E C O L L E C T I O N )
Items marked "crisscrossed wheeled bin" are not allowed to be disposed of together with usual household waste. These
electrical and electronic products should be disposed of in special reception centers, equipped for recycling such products and
components. For information about the location of the nearest disposal / recycling spot and the rules of delivery of waste please
contact your local municipal office. Recycling and proper disposal helps to protect the environment and prevent harmful effects
on health.
complete with the original packaging
HTTPS://ALPHARD.AUDIO
. If the product is no longer under warranty, it will be
EN