Airespace AS 1500 Manuale di installazione rapida - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione rapida per Punto di accesso wireless Airespace AS 1500. Airespace AS 1500 15. Intelligent rf ap

Stampa la pagina

Figure -

Factory-Orderable Mounting Brackets

•

If necessary, drill holes for the various cables where they can be mostly hidden from casual

view. When you are mounting the Airespace AP using an optional separately-orderable

projection-mount L-bracket (the one with two long legs), the cables can be routed through the

5/8-inch (15.9 mm) holes in the bracket.

•

Route the CAT-5, optional power supply, optional external antenna cable(s), and optional

Kensington MicroSaver Security cables to where they can plug into the Airespace AP. Make sure

to leave about 6 inches (15 cm) of slack in the cables for future modifications.

•

Attach the brackets to the wall or ceiling, or install screws for ceiling-mount base:

Where you are going to use the projection-mount or flush-mount bracket, use

customer-supplied sheet metal, drywall, or other screws to attach the bracket to the

ceiling or wall.

•

Where you are going to use the ceiling-mount base, install customer-supplied sheet metal,

drywall, or other screws with 1/4 inch (6.35 mm) or smaller heads protruding from the ceiling

about 0.1 inch (2.5 mm).

•

If necessary, drill holes for the various cables where they can be mostly hidden from casual

view.

•

Route the CAT-5, optional power supply, optional external antenna cable(s), and optional

Kensington MicroSaver Security cables to where they can plug into the Airespace AP. Make sure

to leave about 6 inches (15 cm) of slack in the cables for future modifications.

You are now ready to install the Airespace APs. Continue with

12/29/04

90-100tbd-000 Rev 1 (Preliminary 3)

TBD

Step 3: Preparing Mounting Locations

Step 4: Mounting the Airespace

APs.