Deaf Bonce Machete series Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti per auto Deaf Bonce Machete series. Deaf Bonce Machete series 12. Hf speakers
Anche per Deaf Bonce Machete series: Manuale d'uso (16 pagine), Manuale d'uso (12 pagine), Manuale d'uso (16 pagine), Manuale d'uso (8 pagine), Manuale d'uso (20 pagine), Manuale d'uso (16 pagine), Manuale d'uso (16 pagine), Manuale d'uso (20 pagine), Manuale d'uso (16 pagine), Manuale d'uso (16 pagine), Manuale d'uso (20 pagine), Manuale d'uso (20 pagine), Manuale d'uso (16 pagine), Manuale d'uso (16 pagine), Manuale d'uso (16 pagine), Manuale d'uso (16 pagine), Manuale d'uso (12 pagine), Manuale d'uso (16 pagine), Manuale d'uso (16 pagine)

Stampa la pagina

3 4 5

1 1

S e l e c t i o n o f t h e d i a m e t e r o f s p e a k e r c a b l e s

Use the table below to select the desired diameter based on the length and power consumption.

4 . H O W T O U S E

The correct choice of the ampliﬁer settings prolongs the lifetime of your subwoofer. Proper coordination of the head unit (HU)

with the ampliﬁer will provide clean, undistorted signal fed to the subwoofer, which prevents overheating and voice coil damage.

Like any other speaker the subwoofer has moving and stationary parts. We strongly recommend that the moving parts of the

subwoofer should be warmed up at the beginning of operation. Be extra careful when warming up the parts. Warm up the

subwoofer using musical material for 40 hours at medium power. If you feel strange smell during operation at maximum volume,

you should lower the volume of the subwoofer and let the device to cool down at a low volume.

Recommended settings of the ampliﬁer and HU: Volume of HU should not exceed 80%. The ampliﬁer sensitivity should be set

to 50%. The low pass ﬁlter LPF (the ﬁlter that cuts all frequencies above those set for the ﬁlter) should be set to 63-80 Hz.

5 . S P E C I F I C A T I O N S

Model

Subwoofer size (Inch)

Power RMS (Watt)

Power MAX (Watt)

Frequency response (Hz)

Impedance (Ohm)

1. FUSE - fuse connection terminal

2. +12V – power supply terminal +12 V

3. REM IN – connector of remote activation of the amplifier

4. GND – grounding supply terminal

5. INPUT – signal input, RCA jacks

6. HIGH LEVEL INPUT – high level signal input terminal

7. REMOTE – input for connection of the bass remote control

8. GAIN – input signal level adjustment (0.85 – 4 V)

9. LPF – low pass filter (30 Hz – 280 Hz at 12 dB/Oct)

9 10

10. POWER – LED for operation (blue), LED for protection (RED)

11. GAIN – input signal level adjustment

12. POWER – LED for operation (blue)

25 000

20 000

15 000

10 000

8000

6000

4000

2000

1000

500

250

100

0-1 1-2 2-3 3-4 4-5 5-6 6-7

Size

A.W.G mm²

16,8

8,37

5,26

2,08

7-8

Cable length (m)

ML-10A

250

1000

25 - 280

ML-12A

250

1000

25 - 280