GAME 4524 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Riscaldatore per piscina GAME 4524. GAME 4524 12.

INSTALLATION INSTRUCTIONS

Heater – Filter – Pool Layout

The system layouts below will help you install the solar heater(s) to your above ground pool

BEFORE INSTALLING SOLAR HEATER

AFTER INSTALLING SOLAR HEATER

Heater - Pool Connections

These instructions assume that the pool and filter system are already assembled and there is a hose attached to the pool return (pool

water inlet)

Place the solar heater in a location where it will receive the greatest amount of sunlight and at least 10 feet away from pool

1) Heater - Filter Pump Connection

a) Turn off filter pump

b) Block water flow at both the pool return inlet and the filter pump outlet to prevent water from flowing through the hoses

c) Detach the pool return hose from your filter system and set aside

NOTE: If you are using an INTEX® filter, remove the hose adapter from the filter port as well.

d) Depending on the orientation of your pump setup and desired heater placement, choose one side to be the inlet and the

other to be the outlet

e) Clear ground around the area where heater will be oriented Remove all sharp objects, such as rocks and sticks, and lay down

a tarp or other ground cover (recommended)

f ) Unfold heater and position where desired

g) (XB2 ONLY) Ensure that clear cover is completely installed and zipper closed

h) Locate long filter hose and attach between pump (the port where the pool return hose was previously connected) and the

inlet using the included hose clamps

SAVE THESE INSTRUCTIONS

NOTE: Not shown to scale