AGT INDUSTRIAL AGT-WB24 Manuale del prodotto - Pagina 2
Sfoglia online o scarica il pdf Manuale del prodotto per Equilibratori per ruote AGT INDUSTRIAL AGT-WB24. AGT INDUSTRIAL AGT-WB24 18.
Stampa la pagina●
The machine must be operated by specially trained and qualified personnel. Any modification of the machine
parts and out of scope of use, without the permission of the manufacturer or the requirements of the manual,
direct or indirect damage to the machine.
● The balancing machine should be installed and fixed on smooth ground. Don't place it on wood floor!
Otherwise the accuracy will be reduced easily!
A distance of not less than 0 . 6 m should be left between the back of the balancing machine and the wall to
●
ensure good ventilation and heat dissipation. Note: leave enough space on the left and right side of the balancing machine
to allow unrestricted operation
●
Do not keep the balancing machine in an extremely hot, extremely cold, or extremely humid environment. Avoid
placing it next to heating equipment, faucet, air humidifier or stove, and avoid contacting with a lot of dust, ammonia,
alcohol, thinner or spray adhesive.
When operating, please use appropriate equipment and tools, and wear corresponding labor protection supplies,
●
such as: work clothes, goggles, safety shoes
When the machine is working, please keep it away from the non- operator. Please be careful not to touch the
●
moving parts with hands or other parts of the body when the balancing machine is working.
DO'S AND DONT'S
。
。
may cause
2