Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA Manuale di montaggio - Pagina 5
Sfoglia online o scarica il pdf Manuale di montaggio per Giocattolo Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA. Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA 13. Pack 03
Anche per Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA: Manuale di montaggio (11 pagine)
Stampa la pagina
SUZUKI GSX 1300R Hayabusa: Assembly Guide
13
Insert the end of the lag screw into
the hole projecting forward on the
bottom yoke.
18
Place the end of the damper case with
the projecting hole over the end of the
damper shaft.
70
14
Place an M2 nut over the end of
the screw.
19
Check that the damper case moves
smoothly along the shaft. If it doesn't,
remove it from the shaft and check the
holes at either end, as there may be a
blockage. Use the end of some tweezers
to try and open the hole.
15
16
Hold the nut against the end of the
screw, then tighten the screw into
the nut with a screwdriver.
20
Wrap some masking tape around the
steering damper shaft, to temporarily hold
the case in place.
Move the damper shaft back and
forth, to confirm that the screw is
secure and to make sure that the
shaft isn't too loose at the screw.
Stage
complete!
This stage is now complete.
Store any leftover parts, along
with the unused 2.3 × 6mm
screws, in a plastic bag labelled
with this stage's number.
17
If the damper shaft is loose, apply
a tiny amount of multi-purpose
adhesive to the end of the screw,
by the nut, to hold them together.