Game On Sport MEGAJUMP Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Accessories Game On Sport MEGAJUMP. Game On Sport MEGAJUMP 16.

FRAME LAY-OUT:

Use the parts list to identify each part and to make sure that all parts are present. Check which trampoline size you

have purchased and lay all parts on the floor according to one of the below pictures which matches your trampoline

size. All the "top rails with leg sockets"are universal parts and can only be connected together in one way. To connect

the parts, simply slide the thinner end of the tubing into adjacent section with the larger opening. These joints are

called "connector points".

STEP 1: Support assembly

Slide vertical leg extension (5) into the leg base (4) as shown.

STEP 2: Top rail assembly

Two people will be needed at this point to assemble the trampoline. One person lifts the support assembly from step 1

to a standing (vertical) position and inserts one of the sockets of the top rail with sockets (3) into the vertical leg ex-

tension portion of the support assembly. The other person holds the end and inserts that portion into the other support

assembly as shown. You should now have 2 support assemblies held together by 2 top rails with sockets.

Take note! Make sure the holes of the vertical leg extension are placed straight in front of the holes of the legs. This way

it is easier to assemble.

STAP 3: Assembly total frame.