Jaen Siracusa 16E+ Manuale - Pagina 13

Sfoglia online o scarica il pdf Manuale per Strumento musicale Jaen Siracusa 16E+. Jaen Siracusa 16E+ 20.

Adjusting the Pickup-String Clearance

You should do this...

When you notice that the amplified sound of a string or group of strings

is louder or weaker than the others, or when the output of a pickup is

too high or too low.

Necessary tools: You will need the small Hex key supplied with the guitar.

Method:

The neck pickup is set at a fixed height, so all the adjustments will be

only on the individual polepieces, two per string. Turn them clockwise to

reduce the output of a string, and counterclockwise to increase it.

The height of the bridge pickup can indeed be modified. This is useful if,

for example, you are trying to balance it with the neck pickup so that

both have a similar maximum output. To do it, loosen the screws S (see

drawing) enough so that you

can raise or lower the

pickguard bracket, and then

tighten them again. After

this coarse adjustment you

can proceed to make fine

adjustments

polepieces, the same as you

did for the neck pickup.

Note:

The pickups in your guitar have two rows of polepieces. I favor this

design because it makes possible to use bronze wound strings instead of

the usual steel or nickel wound strings that are used for electric guitars.

Let me explain this.

the