HIKVISION ColorVu DS-2CE72KF3T-E Manuale d'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso per Telecamera di sicurezza HIKVISION ColorVu DS-2CE72KF3T-E. HIKVISION ColorVu DS-2CE72KF3T-E 19. Bullet & turret camera
Stampa la pagina
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the mount.
If the product does not function properly, contact
your dealer or the nearest service center. DO NOT
disassemble the camera for repair or maintenance by
yourself.
2.1
Installation of Type I and Type II Camera
2.1.1 Ceiling/Wall Mounting of Type I Camera Without
Junction Box
Before you start:
Ceiling mounting and wall mounting are similar.
Following steps take ceiling mounting as an example.
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
4. Route and connect the power cord and video cable.
5. Align the screw holes in the bracket to the ceiling,
and secure the camera with three PA4 × 25 screws
(supplied).
Figure 2-2 Secure Camera to Ceiling
6. Power on the camera to adjust the view angle
according to the figure below.
Rotation Position
[0° to 360°]
Screw Ho le
Figure 2-1 Drill Template
Screw Ho le
Screw Ho le
template
2
Pan Position
[0° to 360°]
Trim Ring
Tilt Position
[0° to 180°]
Thumbscrew
Screw