Majacraft Suzie Professional Manuale - Pagina 9

Sfoglia online o scarica il pdf Manuale per Ruote che girano Majacraft Suzie Professional. Majacraft Suzie Professional 12.
Anche per Majacraft Suzie Professional: Manuale (12 pagine)

Stampa la pagina

Now work on the pedal on your right. Obviously there will only be one available conrod now. The

one that is CLOSEST to the DRIVE WHEEL. Push the green joiner through the hole in the pedal end

into the right hand pedal. It should protrude through the bottom of the pedal about 2mm. Check

the alignment of the rod end in the crank assembly as shown in the images below. You may need to

twist the green joiner in the pedal to correct the alignment. When the rod end is aligned correctly -

parallel with the face of the drive wheel - screw the 25mm screw into place. The screw should only

be tightened until the head just touches the side of the pedal. DO NOT OVERTIGHTEN!

CORRECT

EXTRA

If you are not certain of the connection arrangement, here is a

full description. Place the wheel directly in front of you so you are

looking at the crank assembly attached to the drive wheel. The

rubber joiner that is on the conrod that is closest to you goes into

the hole in the pedal on your left. The joiner on the conrod that is

furthest from you goes into the hole in the pedal that is on your

right.

INCORRECT

majacraft