CentralPneumatic 69927 Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Pistola per unghie CentralPneumatic 69927. CentralPneumatic 69927 20. Framing nailer 28 angle

Clearing Jams

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION,

BEFORE ANY MAINTENANCE OR REPAIRS ARE DONE (including clearing jams):

• Wear ANSI-approved safety goggles with side shields.

Other people in the work area must also wear ANSI-approved impact safety goggles with side shields.

• Release the trigger.

• Detach the air supply.

• Attempt to fire the Tool into a piece of scrap wood to ensure that it

is disconnected and is incapable of firing any fasteners.

• Empty the magazine and leave it open during service.

The Magazine is spring-loaded and may cause parts or a fastener to fly out of the Tool.

1. If a fastener is jammed in the

discharge area, remove it with pliers.

2. If a fastener is jammed in the magazine, pull the

Pusher all the way back to the engaged position.

Use a screwdriver to release the jammed fastener

by probing the openings in the magazine.

Item 69927

69928

For technical questions, please call 1-800-444-3353.

3. Pull out the jammed fastener and the remainder of

the fastener strip from the magazine.

Dispose of the remaining fastener strip;

it is likely bent or damaged and may cause repeated

jamming or damage to the tool if reused.

4. If the jam cannot be cleared using the method above,

have the tool serviced by a qualified technician.

Page 15