GameSir T2a Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Controllore GameSir T2a. GameSir T2a 4. Wireless controller

Stampa la pagina

3. Take out the USB Wireless Dongle under the Dongle dock

at the back of the controller

4. Insert the USB wireless dongle into the USB port of the

device you would like to use (PC, Phone, Tablet, Smart box,

Smart TV)

* If the device does not include the standard USB port,

please insert the USB dongle into the OTG cable, then insert

the Micro-USB head of the OTG cable into the the device

Micro-USB port

5. Press the HOME button, the controller will start search (the

then auto connect to the 2.4g wireless dongle, the LED will

remain on when successfully connected to the USB dongle

5. WIRED: Insert the USB head of USB cable into the USB

port of PC, switch XINPUT mode, the LED will remain ON

when successfully connected

6. 2.4G WIRELESS: Insert the USB dongle into the USB port

of PC, switch XINPUT mode, the LED will remain ON when

successfully connected

7. Enter to the "Game Controllers" of Control Panel to test

each button

8. Click Test streaming to test the network speed

9. Click Stream to start steaming Xbox One

games

6. The controller will enter sleep mode when not in use after 5

mins. Single Press HOME button to restart.

Bluetooth Pairing Instruction：

1. Remove the battery cover at the back of the controller,

follow the battery contact indication to install rechargeable

batteries

2. Store battery cover for future use with AA batteries if re-

quired

3. Remove USB Wireless Dongle from the PC or Android De-

vice

4.Make sure your device has Bluetooth connection switched

ON. Press & hold the HOME button for 3 seconds, the con-

troller will to begin search (the Bluetooth LED

lights are stationary follow instructions from your at PC/An-

droid device. side, The LED lights will remain on when con-

nected to PC/Android device. You may need to allow pairing

on your device check settings.

Bluetooth Connection Instruction：

1. Make sure your USB Wireless Dongle is not plugged in to

your PC or Android Device

2. Single press the HOME button, the controller will start

search 2.4G dongle for 6 seconds. After that it will start to

connect to previous paired device, the Bluetooth LED will

when connected to PC/ Android device

*BLUETOOTH connection only supports DINPUT mode, it does not support XINPUT mode.

Android

4.0+ Instruction:

1. WIRED: Insert the USB head of USB cable into the USB

port of Android device (Phone, Tablet, Smart box, Smart

TV), switch to the DINPUT (Android game) mode, the LED

remains ON when successfully connected

2. 2.4G WIRELESS: Insert the USB dongle into the USB port

of Android device (Phone, Tablet, Smart box, Smart TV),

switch the DINPUT (Android game) mode, the LED remains

ON when successfully connected

3. BLUETOOTH WIRELESS: Remove the USB dongle from

Android device (Phone, Tablet, Smart box, Smart TV), refer

the connection instruction. the only default mode is DINPUT,

the Bluetooth LED remains ON when successfully connect-

* If your device does not include the standard USB port, in-

sert the USB dongle or USB cable into the OTG cable, then

insert the Micro-USB head of the OTG cable into the device

Micro-USB port

4. Start Games (please switch to XINPUT mode if the game is

not supported by the DINPUT mode)

will start