Adexa PBF 88/128 Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Attrezzature per alimenti commerciali Adexa PBF 88/128. Adexa PBF 88/128 8. Bakery & pastry ovens

LIGHT CONTROL KEY AND LED: LED turns on when pressed, lamp relay outputs.

When the button is pressed again the LED turns off and lamp does not relay output.

TIMER ACTIVATING KEYS AND LED: LED turns on when pressed, the time begins

to count down. At the end, the device beeps.

START / STOP KEY AND LED:

START. Depending on the setpoint appliance starts to control temperature. Turbo

automatically activated when the measured temperature is below the set value, resistances

work full. Setpoints can change at the start position. Temperature control set will continue to

run according to the new setpoint. Resistance relay stays towed until the measured

tempreature values reach the temperature setpoint and the LED lights. Measuring resistance

value reaches setpoint relay releases, the set temperature LED is off. Pressing a key maket

he device stopped and LED turns off, all of the controls and relays are disabled.

STEAM ON KEY AND LED: Steam on key activates the steam thermostat. The LED flashes

as long as is stays turn on. When thermostat stays off the signal comes to switch input and

steam is ready. The LED stays on continuously.

STEAM OFF KEY AND LED: When pressed steam off button, steam thermostat stays

disabled and lights turn to red.

STEAM KEY AND LED : As long as the key is held down, steam valve output data.

Otherwise, the key does not work and gives audible warning. In faults, control will be

cancelled.

PROGRAM KEYS AND LEDS: Device with steam has 6 program, device without steam has 9 program.

Pressing a random button will bring the value set automatically. To run the sufficient program it is enough to

press the desired program's button.

LED turns on when pressed and switches to position

Sayfa 6