Adexa TS-2F Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Attrezzature per alimenti commerciali Adexa TS-2F. Adexa TS-2F 2. Warming tray

Switching the INFRARED LAMP on/off

– Set the lamp switch to ON or OFF position.

Selecting pans

CAUTION! The appliance is designed for keeping food warm, do not use to cook or heat food.

Use pots and pans with flat, smooth bottoms.

GN 1/1 and GN1/2 pan are recommended to use.

Cleaning and care

Sugar and food containing sugar (i.e. marmalade) and melted plastic must immediately be removed from the hot

cooking surface with the cleaning scraper. If not, the cooking surface can be ruined while it's cooling down.

Steam and/or pressure cleaning machines can't be used to clean the appliance! This can damage the unit, resulting

in the risk of personal injury.

Clean the cooking surface after every use. Dirt that hasn't been removed will burn into the surface the next time it's

turned on and then these incrustations may be permanent.

Cleanser residues can cause discoloration the next time you turn on the cook top. Cloths and sponges that have been

used to clean other surfaces can cause discoloring, too.

Do not use any

aggressive or bleaching cleaning agents that contain active oxygen, chlorine or corrosive components.

- abrasive or aggressive cleaning or scouring agents like steel wool, soap-filled steel wool, metal or plastic sponges

or similar agents with an abrasive surface.

Cleaning the cooking surface

– Use the cleaning scraper to remove all food residue and fat splashes from the hot cooking surface.

– Wipe off the surface with clear water.Dry it thoroughly.

Remove caking

Heavy dirt should be soaked first. Use a wet cloth for best results. It will be easier to remove the dirt.