Adexa YSD-4AD Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Forno Adexa YSD-4AD. Adexa YSD-4AD 11. Electric convection oven

Stampa la pagina

Cleaning & Maintenance

 Before cleaning disconnect the oven from the power supply. Wash the shelves with

warm soapy water and rinse with clean water

 All other parts of the oven can be cleaned with a damp cloth

 DO NOT submerge the oven in water or use water sprays to clean it

 Always clean the convection Oven daily to avoid grease building up

 Use only non-abrasive cleaners and pads. Abrasive cleaners and scouring pads

could scratch the finish of the oven

Transportation & Storage

In the process of transportation, the appliance should be handled carefully, preventing

the intense shaking. The packaged appliance should be stored in a well-ventilated area

free of caustic air. It cannot be placed in the outside area and should never be put

upside down. Keep it dry and dust-free. Do not expose it to direct sunlight. Avoid

mechanical shocks and vibrations. If it is for temporary storage, the weather-proof

method should be taken.

Troubleshooting

Condition

The unit is plugged in but

not working

The oven is not heating

when the timer &

temperature are both set &

the screens are both on

The oven keeps heating in

high temperature

Possible Cause

1. The unit is not

switched on

2. The plug or lead are

damaged

3. The fuse has blown

4. Overheat protection is

triggered

5. The door is not closed

properly

1. Digital controller may

be broken

2. At least one of

heating wires may have

burnt out

3. Motor problem

The electronic board

may be broken

Solution

1. Check the unit is correctly

plugged in and switched on

2. Contact service.

3. Replace the fuse

4. Cool the unit for about 30

minutes, then press "reset"

5. Close the door tightly

Contact the service.