Decagon AQUA LAB VSA Manuale di avvio rapido - Pagina 9

Sfoglia online o scarica il pdf Manuale di avvio rapido per Strumenti di misura Decagon AQUA LAB VSA. Decagon AQUA LAB VSA 12. Vapor sorption analyzer

Stampa la pagina
•
To choose to include a timeout setting, press   with
      "Timeout" highlighted, and then cycle to the desired
      value using the up and down arrows. Any value between 
           5.0 min to 30 days can be selected. The timeout 
           determines the maximum time allotted to move from 
           the starting 
           The default value is off, which means there is no 
           timeout value.
•
To choose to have the isotherm loop, press   with
      "Loop" highlighted to toggle between on and off. 
      Turning loop on causes the isotherm to automatically
      return to the start 
      the final 
           an adsorption and desorption curve (or vice versa 
           depending on the starting direction).
• For DVS method
•
To choose the starting 
      highlighted, and then cycle to the desired value using
      the up and down arrows. Any value between 0.03
      and 0.95 
      Choosing "current" means that the stage will start at
the initial
•
To choose the final 
      highlighted, and then cycle to the desired value using
      the up and down arrows. Any value between 0.03
      and 0.95 
      (see"current" definition above). Selecting a final 
      that is lower than the starting 
      desorption, while selecting a final 
      starting 
      finished.
•
To choose the temperature of the stage, press   with
      "Temperature" highlighted, and then cycle to the
      desired temperature using the up and down arrow
      keys. Any temperature between 15-60°C can be
      chosen. Each stage can run at a unique temperature.
•
To choose the desired 
      highlighted and then cycle to the desired value using
a
 to the final 
w
a
 (with the same settings) once
w
a
 has been achieved. This would create both 
w
a
 can be chosen including "current". 
w
a
 of the sample. Press   when finished.
w
a
, press   with "Final"
w
a
 can be chosen including current 
w
a
 will result in adsorption. Press   when
w
a
V S A Q u i c k S t a r t G u i d e
a
 (DDI only) and is optional.   
w
a
, press   with "Start"
w
a
 will result in
w
a
 higher than the
w
 step, press   with "Step"
w
a
w