Bristan Value VAC LBSM C NH Istruzioni per l'installazione e manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'installazione e manuale d'uso per Prodotto idraulico Bristan Value VAC LBSM C NH. Bristan Value VAC LBSM C NH 8. Bath shower mixer
Stampa la pagina
Introduction
Introduction
Introduction
Introduction
Thank you for choosing Bristan, the UK's leading taps and showers expert. We have designed
these products with your enjoyment in mind. To ensure that they work to their full potential, they
need to be fitted correctly. These fitting instructions have been created to give you all of the
information you need and, if you need any further help, please do not hesitate to give us a call on
0844 701 6273.
Safety Note
Safety Note
Safety Note
Safety Note
Please read these instructions thoroughly and retain for future use. All products manufactured
and supplied by Bristan are safe provided they are installed correctly, used correctly and
receive regular maintenance in accordance with these instructions.
These fittings need to be installed in accordance with and meet the requirements of the Water
Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
Specification
Specification
Specification
Specification
Operating pressure range (bar)
Maximum static pressure – 10.0 bar
NOTE:- Nominally equal (balanced) inlet supply pressures are recommended for optimum
performance.
Designed to comply with BS EN 200 for single taps/ combination taps for water systems of type 1
and 2 general technical specifications and to be used within systems designed to BS 6700.
BS 6700 recommends the temperature of stored water should never exceed 65°C. A stored water
temperature of 60°C is considered sufficient to meet all nominal requirements and will minimise
the build up of lime scale in hard water areas.
02
Before starting any installation please consider the following:
Prior to drilling into walls, check that there are no hidden
electrical wires, cables or water supply pipes. This can be
electrical wires, cables or water supply pipes. This can be
checked with the aid of an electronic detector.
If power tools are used do not forget to:
- Wear eye protection
- Unplug equipment after use
Min.
0.2
Max.
7.0