Gamma 7000 Es Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Macchine incordatrici Gamma 7000 Es. Gamma 7000 Es 20.

Slow

Pull

which results in more accurate and consistent tensioning when using the stiffer aramid or

metallic strings.

MOUNTING THE FRAME

Fast

Pull

Support Slide Adjustment

Once the frame support posts are secured,

lightly tighten the support slides by turning

the knobs on the outside of the slides clock-

wise. Adjust the slides in equal increments

until slight resistance is felt.

Apply a final adjustment to all racquet sup-

port points until the racquet is firmly secured

in the mounting system.

Should the frame supports lose contact with

the frame while stringing, they should be

adjusted, as needed, to maintain contact with

the frame.

Setting Tension

The 7000 ES stringing machine utilizes a

rotary adjusting knob along with a digital

L.E.D. display to indicate the set tension. To

set the tension, rotate the adjustment knob

clockwise to decrease the displayed ten-

sion, counter-clockwise to increase the dis-

played tension, until the desired tension is

displayed on the digital display.

Setting Tensioner Speed

To maintain consistency in stringing tension

for all types of strings, the 7000 Es can be

set to pull at a fast or slow tensioning speed.

When pulled at high speed, stiff Aramid fiber

and Metallic strings will generally string up

4-5 lbs tighter on the 7000Es than synthetic

or natural gut strings. Therefore, when string-

ing with Aramid (Kevlar, Technora) hybrid

strings or metallic strings, the tensioner

speed switch, located on the side panel,

should be set to the slow pull position.

This decreases the motor speed by one half