Gamma PROGRESSION 602 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Macchine incordatrici Gamma PROGRESSION 602. Gamma PROGRESSION 602 16.
Anche per Gamma PROGRESSION 602: Manuale d'uso (12 pagine)

Stampa la pagina

ASSEMBLY INSTRUCTIONS

MOUNTING THE FRAME

Engaging the Drop Weight Bar Stop

The stringing machine is shipped with the

drop weight bar in the horizontal position.

To prevent racquet damage during stringing,

the bar stop must be engaged.

Remove the machine base from the shipping

carton being careful to avoid lifting by the

plastic cover.

Hold the drop weight bar in the vertical posi-

tion as shown while turning the stop screw

clockwise with the supplied 5mm hex wrench.

Adjusting the Frame Support Posts

Place the racquet frame over the center

posts and onto the frame support. Loosen the

lever lock bolt on one support post. Slide the

post outward until the center support of the

racquet support slide is positioned near the

inside surface of the racquet frame. Securely

tighten the lever lock bolt.

Adjust the opposite post using the same

procedure.

Caution: To avoid racquet damage, the

center posts should not contact the racquet

prior to ﬁ xing the support posts.

Tightening the Center Supports

Tighten the Center Supports by turning

the adjustment knob clockwise until slight

resistance is felt.

Caution: Overtightening the Center Supports

may cause racquet damage.