Gamma Progression ES II Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Macchine incordatrici Gamma Progression ES II. Gamma Progression ES II 16.

STRINGING THE FRAME

Clamp Head Operation

"Quick Action"

Clamps are of a dual action design where as the

clamp head and clamp base operate independently of one

another.

To clamp a string, lift the clamp head and place the string between

the jaws and depress the clamp head lever to secure the string.

The clamping pressure applied to the string should be adjusted to

provide sufficient pressure to secure the string when subjected to

the desired pulling tension. The diamond coated gripper plates

provide for increased friction between the clamps and the string

to allow for reduced clamping pressure while securing and holding

the string under tension.

Clamp Base Operation

Rotate the Base Locking Lever clockwise to secure the clamp

base to the turntable.

Reverse the clamping procedure to unlock the string clamp. The

Locking Lever is spring loaded to assist the unlocking of the clamp

base.

The Locking Lever should be tightened enough to prevent clamp

base slippage on the turntable, when the desired tension is placed

on the string. To go from the loose position to the clamped position

and back, generally requires the rotation permitted by the slot in

th clamp base. If the rotation is not sufficient to allow smooth

operation of, adjust the Clamp Base Locking Nut as outlined

below.

Note: If the string slips in the string clamp while tensioning, adjust

the gap between the clamp jaws as per the following instructions.