Gamma Borealis R Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di illuminazione Gamma Borealis R. Gamma Borealis R 20. Led moving wash/beam

Introduction and Setup

Thank you for having chosen this professional moving head. You will see you have acquired a

powerful and versatile moving light. First, Unpack the device.

Inside the box you should find:

a. Moving Head

b. DMX Signal Cable 1 pc

c. Power Cable

d. User Manual

e. Omega Clamps

(Flight case, Safety cable and Clamps are optional, please contact your dealer)

Please check carefully that there is no damage from shipping. Should there be any problems,

please consult your dealer and don't use the light until you've verified it's good to go!

Before installation, please read the user manual carefully, then prepare Omega Brack-

ets (2 pcs), Clamps (2 pcs), and Safety Cable (1 pc).

Clamp Mounting: The Borealis R provides a unique mounting bracket assembly that inte-

grates the bottom of the base, and the safety cable rigging point in one unit.

When mounting this fixture to truss be sure to secure an appropriately rated clamp to the

included omega bracket using a M10 screw fitted through the center hole of the omega

bracket.

As an added safety measure be sure to attached at least one properly rated safety cable

to the fixture using on of the safety cable rigging point integrated in the base assembly.

 Extremely small, fast and powerful LED moving head.

 DMX Channels: 14 and 25 channel modes

 Operation modes: DMX 512, Master/Slave

 Perfect for stage, theatre, church, studio, and more!

Borealis R – GAMMA LED Vision

1 unit

1 pc

1 unit

2 units

Page 3 of 20