Decibel Eleven Time After Time Manuale operativo - Pagina 7

Sfoglia online o scarica il pdf Manuale operativo per Pedale musicale Decibel Eleven Time After Time. Decibel Eleven Time After Time 13. Fully analog delay pedal

Stampa la pagina

pending preset number. At that point, if the 'B' footswitch is pressed, then that preset

number will be loaded. If the 'B' footswitch is pressed again, the pedal will be

bypassed. To load a different preset, press the 'A' footswitch to change the pending

preset until the desired preset number is displayed. Press the 'B' footswitch to enable

the displayed preset.

It is possible to use the 'A' footswitch to go directly from one preset to another preset

without first bypassing. With the pedal enabled, use the 'A' footswitch to scroll to the

next desired preset number. Notice that the decimal point will be displayed to indicate

that the displayed preset number is pending (not active). Press the 'B' footswitch to

activate the displayed preset.

When using the 'A' footswitch to scroll presets, if a pending preset is a

TAP MODE preset, then the tempo LED will flash at the current tempo and

you can use the 'A' footswitch to tap in a new tempo. If you wish to use

the 'A' footswitch to continue scrolling to the next preset, then the 'A'

footswitch must be held in order to disable the tap functionality and

increment the preset.

In order to more effectively manage scrolling in PRESET MODE, it is possible to set a

limit on the number of presets used. This cuts down on the need to scroll through

unused presets. For example, if you are only using 3 presets, then when in PRESET

MODE you can use the 'A' footswitch to scroll 1, 2, 3, 1, 2, 3, etc. See the GLOBAL

SETTINGS section on page 8 for setting the preset limit.

BANK MODE

In BANK MODE, the two switches act like two independent preset switches. Pressing

the 'A' switch will toggle the A preset, and pressing the 'B' switch will toggle the B

preset. Pressing 'A' while 'B' is active will switch 'A' on and switch 'B' off, and vice-

versa. The In BANK MODE, the 10 user presets are accessed in 5 banks of 2 presets,

and the current bank number will be displayed. In order to change banks, press and

hold the MOD DEPTH knob and then press 'B' to increment the bank, and 'A' to

decrement the bank.

BYPASS TYPE

The Time After Time has two options for pedal bypass type.

True bypass uses a relay to bypass the effect. When the pedal is off, there are no

active electronics in the signal path, and all effect is cut off.

Tails spillover bypass keeps the direct, dry signal path active even when the effect is

bypassed. This allows the delay tails or trails to spillover and ring out even after the

pedal is bypassed.