Gamma Orux 700 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Attrezzature per DJ Gamma Orux 700. Gamma Orux 700 20. Led moving beam/spot

Introduction and Setup

The ORUX 700 is a full-featured Profile moving head featuring a variety of advanced

features including CMY Color Mixing, multiple gobo wheels, color wheel, prism, zoom,

frost, and more!

Unpacking:

Remove the fixture carefully from the box.

•

Release the pan and tilt locks before using.

•

In the box, you'll find:

•

(1) GAMMA Orux 700w

•

(1) DMX 3-Pin Cable

•

(2) Included Clamps attached to fixture.

•

(1) PowerCon Power Cable

Before installation, please read the user manual carefully, then prepare the fixture and

a Safety Cable (1 pc).

Clamp Mounting: The Orux 700 provides a unique mounting bracket assembly that

integrates the bottom of the base with clamps that swivel into place.

As an added safety measure be sure to attached at least one properly rated safety cable

to the fixture using on of the safety cable rigging point integrated in the base assembly.

The safety attachment point shall be rated for 10x the weight of the fixture and all

accessories.

This fixture is equipped with an auto-switching power supply that automatically adjusts to

any 50-60Hz AC power source from 100-240 volts. The fixture is protected by one 12a

primary blow fuse (5mmx20)

The locking connector is connected and disconnected as shown:

ORUX 700 Hybrid – GAMMA LED Vision

Page 3 of 20