Airflow AFLR48 Istruzioni per l'installazione - Pagina 3
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Ventilatore Airflow AFLR48. Airflow AFLR48 4. Ceiling sweep fan
Stampa la paginaAFLR48
6.0 Connecting the Speed Controller
Fan Only
All Airflow Ceiling Sweep Fans come complete with a three
speed flush fitting capacitor controller.
This controller fits to standard 84mm fixing centres, the same as
a normal switch or power point.
Although supplied standard in the vertical format, the mechanism
can be rotated 90° to provide a horizontal format if required.
Three is the highest speed, one is the lowest.
• Remove switch surround.
• Terminate cables as illustrated in the below diagram.
• Active to Common and Switched Active to terminal one.
• Fix controller to wallbox or bracket using screws provided.
• Screws may need to be shortened for some applications.
• Replace switch surround.
Rotary Switch Mechanism
ACTIVE
SWITCHED ACTIVE
(TO FAN MOTOR)
© Clipsal Australia Pty Ltd
COM
1
3
2
Capacitor
7.0 Connecting the Speed Controller
with a Light Switch
Fan with Light
Requires additional components (not supplied with this fan)
including;
- Clipsal 30M Switch Mechanism
- Two Gang Grid Plate and Cover.
2
SWITCHED
ACTIVE (Light)
ACTIVE
SWITCHED
ACTIVE (Fan)
1
Capacitor
8.0 Operating Instructions
• Turn the knob to speed 3 (top position). This will start the
blades spinning.
• Once the blades are spinning you can select a lower speed
if desired.
• The speed setting is always located at the top position of the
knob as illustrated below.
Ceiling Sweep Fan Installation Instructions
COM
Clipsal 30M Switch
1
Mechanism
L
COM
Rotary Switch
3
Mechanism
2
Top Position
3
3 of 4