Major Manufacturing DL1200 Trilogy Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Per serrature Major Manufacturing DL1200 Trilogy. Major Manufacturing DL1200 Trilogy 3. For alarm lock

ENGRAVING
Using a combina-
tion square,
square the drill
guide to door. The
backset will auto-
matically be
centered with the
HIT-22. Do not let
the guide slip in
this step.
NOTE: MOUNT
ON DOOR WITH
ENGRAVING IN
UPRIGHT
POSITION.
Fig 5
Drill four 7/32"
holes on both
sides of the door
using the drill
bushings located
at the corners.
Fig 7
Remove the
HIT-22 locating
tool. A handle is
supplied that
makes the job
easier.
Fig 9
Use the drill screws
that were supplied
with the guide and
attach one using an
electric drill. NOTE: A
drill with a clutch drive
is a big help, you do
not want to snap a
screw in the door. The
screw mounting holes
are located between
the drill bushings top
and bottom. Screw
only to one side of the
door.
Fig 6
Remove the two drill
screws holding the
guide to the door.
Fig 8
The door is now ready
to install the Alarm
Lock DL1200. Note:
the screw holes used
to mount the guide will
be covered by the lock
and will not be visible
once the installation is
completed. Install lock
per manufacturers
directions.
Fig 10