Gamma Sports 602FC Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Macchine incordatrici Gamma Sports 602FC. Gamma Sports 602FC 9.

Stampa la pagina

MOUNTING THE FRAME

mounting system when the handle is grasped and attempts are made to move it. Should any

supports lose contact with the frame while stringing, they should be re-tightened.

Tightening the Center Supports

Tighten the Center Supports by turning

the adjustment knob clockwise until slight

resistance is felt.

Caution: Overtightening the Center Supports

may cause racquet damage.

Frame Shoulder Support

Adjustment

Being sure the shoulder supports are free

to swivel in their mountings, simultaneously

rotate the shoulder support adjustment knobs

clockwise until both shoulder supports gently

and squarely contact the frame.

The shoulder supports are designed to rotate

and can be adjusted to provide maximum

support to the racquet frame. Rotate the

support so that the pads contact the frame

squarely when the arms are closed against

the racquet.

Securing the Frame

Lock the shoulder supports in position by

turning the knob at the base clockwise.

Repeat the adjustment procedure for the

remaining support post.

Re-tighten all of the frame supports in the

same order as before.

Do not overtighten any of the supports as

racquet damage may occur.

The supports should be tightened to the point

where the racquet frame will not move in the

Arm

PATHFINDER AWL

The machine includes the pathﬁ nder string-

ing awl which creates a pathway between

or around strings to make inserting a string

through blocked grommets easier and

quicker.

Insert the awl through the grommet hole in

the same manner as for traditional awls. The

Pathﬁ nder awl must be in the closed position

before insertion.

Once the awl is inserted, pull the handle of

the awl outward while holding the tip section

in place. This leaves the outer sheath in the

grommet hole. Insert the end of the string

into the outer sheath.

While holding the string, slowly pull the sheath

out of the grommet hole to leave the free end

of the string exposed.