DECKED DS1 Manuale di istruzioni per l'installazione - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Automobile Accessories DECKED DS1. DECKED DS1 13. For ford super duty 6'9” bed length 1999-2016
Anche per DECKED DS1: Manuale di istruzioni per l'installazione (13 pagine)
Stampa la pagina
• Use the WASHERS bag and PREP TBO bag for the following steps.
• Slide torsion brace under center vert and tailgate ammo cans. Place bottle opener on the outside of the torsion brace.
• Loosely install (start with your fingers to avoid cross-threading):
• Two 1/2" bolts through upper holes in the bottle opener into the center vert – no washers needed; leave loose.
• Two 1" bolts with nylon washers through the end holes in torsion brace into tailgate ammo cans; leave loose.
• Two 1" bolts with nylon washers through the bottom bottle opener holes and torsion brace into center vert;
leave loose.
• Align bottle opener to edges of center vert and tighten four bottle opener bolts.
• Tighten end bolts into tailgate ammo cans.
PREP TBO
HELPFUL TIP: Bottle opener goes
on the outside of the torsion brace.
DECKED.COM | #DECKEDUSA | @DECKEDUSA
INSTALL: THE FUN STUFF
1" BOLTS
NYLON
WASHER
NYLON
WASHER
1/2" BOLTS
1" BOLTS
RECOMMENDED TORQUE:
1" Bolts - 27 in-lb. | 1/2" Bolts - 18 in-lb.
DS1/DS2 | v.8 | Page 10