Major tech MT155 Manuale di istruzioni - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per Strumenti di misura Major tech MT155. Major tech MT155 8. Coating thickness meter
Stampa la pagina
Select Working Mode
Working Mode:
•
There are 31 working modes in this gauge. Measurement data will not be
stored when the gauge is in Group0 measurement mode.
•
In the other 30 working modes, 30 measured data can be stored in each
mode cycle.
1.
Press the SELECT button to enter the MENU
2.
Press the UP/DOWN button to select WORKING MODE
3.
Press the SELECT button to enter WORKING MODE
4.
Press the UP/DOWN button to select WORKING MODE
5.
Press the SELECT button for OK.
Select Measure Mode (Probe)
The probe has 3 (three) different modes:
AUTO: T he probe can automatically select the working mode. When placed
on steel (magnetic substrates), it will work in magnetic induction
principle. When placed on no-ferrous metals, it will work in eddy
current principle.
Fe:
The probe works in magnetic induction principle.
No-Fe: The probe works in eddy current principle.
1.
Press the SELECT button to enter the MENU
2.
Press the UP/DOWN button to select WORKING MODE
3.
Press the SELECT button to enter WORKING MODE
4.
Press the UP/DOWN button to select WORKING MODE
5.
Press the SELECT button for OK.
Settings
Select Unit
1.
Press the SELECT button to enter the MENU
2.
Press the UP/DOWN button to SELECT THE SETTING
3.
Press the SELECT button to ENTER THE SETTING
4.
Press the UP/DOWN button to SELECT UNIT
5.
Press the SELECT button to ENTER
6.
Press the UP/DOWN button to SELECT
7.
Press the SELECT button for OK
Backlight Brightness Setting
1.
Press the SELECT button to enter the MENU
2.
Press the UP/DOWN button to SELECT THE SETTING
3.
Press the SELECT button to ENTER THE SETTING
4.
Press the UP/DOWN button to SELECT BACKLIGHT
5.
Press the SELECT button to ENTER
6.
Press the UP/DOWN button to adjust the brightness of the BACKLIGHT
7.
Press the BACK button to RETURN.