Green Brook NORSLO DR10 Istruzioni per l'uso

Sfoglia online o scarica il pdf Istruzioni per l'uso per Apparecchiature di illuminazione Green Brook NORSLO DR10. Green Brook NORSLO DR10 2. 10m rod kits

Stampa la pagina

Operating Instructions

DR10 & GR10 (Luminescent)

PLEASE NOTE -

Fibreglass is a mild irritant to those

with sensitive skin. Wearing gloves is

recommended when using the rods.

If you have a reaction (redness or

mild itching) wash your hands

throughly. If the reaction persists for

longer than 48 hours consult a doctor.

To maintain the integrity and flexibility

of this product it is essential to keep the

threaded parts fully mated. Failure to

do so may cause the threads to snap

and invalidate the warranty.

Keep threads free of dust and debris.

Regularly clean them with a stiff brush.

Do not lubricate the threads as this will

attract debris and/or allow rods to

easily unscrew.

If the rods get caught on an

obstruction do not force them. Gently

ease the rods back and forth. If the

rods meet an obstruction e.g. a joist, try

'flicking' them to make the end

'jump' over.

Cleanly cut off damaged part of rod.

If necessary carefully drill/ream out

any fibreglass and/or residual glue

from the metal end.

Glue the metal end onto the rod with

a good quality super glue.

All Rod measurements are nominal.

We reserve the right to change the

design and specification to improve

quality and enhance performance.

RECOMMENDED MINIMUM

BEND RADIUS OF JOINED RODS

If joined rods are bent beyond the

following recommended rates of

bend, the rod and/or brass fitting may

be damaged as a result of bending.

for 10M Rod Kits

SAFETY

INSTRU TIONS

REPAIRS